No worries, these tips will help you get it right. Follow the steps in the manual and pay special attention to the following:
- Lay the frame flat. Is the frame already on the wall? Take it down and carefully lay it on the floor, with the open side (the front) facing up.
- Start at the corners. First press the rubber edge into the groove at each corner. This puts the fabric in the right position straight away.
- Then press in the sides. Work from the corners towards the middle and press the rubber edge firmly into the groove all the way round.
- Check the front. Make sure no white rubber edge is visible from the front.
Still not working? Send a photo to mail@ixxi.com and we'll be happy to help.